
LARQuickTOCpurity
On-line TOC analyser for pure and ultra-pure water, determining TC, TOC, TIC and DOC in the low ppb range without catalysts or reagents.
The QuickTOCpurity is an on-line measuring system for total carbon, total organic carbon, total inorganic carbon and dissolved organic carbon in pure water, in accordance with DIN EN 1484, ISO 8245 and EPA 415.1. Results are reported every three to five minutes in continuous batch mode, so short transient peaks are captured.
Combustion takes place at more than 1,200 °C without catalysts, well above the 680–1,000 °C used by thermally catalytic on-line analysers, so even difficult-to-combust compounds are completely oxidised. The closed system design resists sample contamination and calibration is validated quickly with a gas standard.
Typical duties include Water for Injection in pharmaceutical and biotechnology plants, boiler condensate reclaim in power generation, reverse osmosis and deionised water in microelectronics, and municipal drinking water treatment.
Features and benefits
- Catalyst-free thermal oxidation at 1,200 °C
- TC, TOC, TIC and DOC determination
- Low ppb measuring range (1–2,000 µg/L)
- Response time of three to five minutes
- Quick calibration and validation with a gas standard
- Closed system design resists contamination
- Infrared (NDIR) detection
- TNb detection and dual channel measurement options
- Low maintenance and low cost of operation
Specifications
| Measurement method | Thermal oxidation at 1,200 °C (DIN EN 1484, ISO 8245, EPA 415.1) |
|---|---|
| Measuring ranges | 0.1–20 mg/L (ppm); 1–2,000 µg/L (ppb); others available |
| Parameters | TC, TOC, TIC, DOC; combinable with COD and TNb |
| Response time | 3–5 minutes (TOC) |
| Calibration | Multi-point calibration; QuickCalibration with a gas standard |
| Detection | Infrared (NDIR) |
| Housing | Powder-coated steel IP 54; stainless steel, IP 65 and ATEX Zone 1/2 options |
| Dimensions | 700 × 1,020 × 520 mm (W × H × D) |
| Weight | 115 kg |
| Inflow and outflow | 4.8 mm ID tube |
| Power supply | 230 / 115 V, ~50 / 60 Hz |
| Analog output | 0/4–20 mA |
| Serial interface | RS 232 |
| Safety | 10 A internal, 16 A external |
| Remote control | TCP/IP (Internet) |
| Display | 10.4-inch TFT touchscreen, backlit |
| Data interface | USB |
Options
- ▪ TNb detection
- ▪ Dual channel measurement
- ▪ Stainless steel housing and IP 65
- ▪ ATEX Zone 1 and 2 housings (T3, T4)
Enquire about the QuickTOCpurity
Tell us about your process, sample or monitoring requirement and we will recommend the right configuration. Attach your technical specification or tender document and an application specialist will respond.
- ▪ Application-matched configuration advice
- ▪ Datasheets, certificates and drawings
- ▪ Quotation with lead times
Related products

QuickTOCultra
High-temperature on-line TOC analyser combusting at 1,200 °C to determine true TOC in streams ranging from ultra-pure wa…

QuickCODlab
Bench-top laboratory COD analyser using 1,200 °C thermal oxidation to determine chemical oxygen demand in three minutes,…

FlowSampler
LAR FlowSampler sample conditioning accessory for hot and wet sample extraction.
Need help choosing?
Request a quote, a brochure or application advice for this analyser system.
